Boxing and Bracing

I was able to take two weeks off of work to match the time my wife and daughter had off, and this last afternoon was spent in the garage. A good way to finish off the Christmas vacation 🙂

I spent a good solid 4 hours finishing off a bunch of various boxing and bracing tasks (after sewing two of my welding jacket buttons back on). First was the boxing of the driver’s side chassis tube into the front horn to match the work I did on the passenger side.

Next up was boxing in the sides, and bottom, of the butt joint where the tube chassis angled down to the front horns.  It was really tricky to see the underside of the joint to weld up the seams. Other than the front actuator mounts for the hood, this should be the last structural welding on the front of the car.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s